Hangzhou SUTAMI Industry Technology Co., Ltd

Deep Groove Ball Bea(1)

Hangzhou SUTAMI Industry Technology Co., Ltd

Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]

sf-1 3620 oilless bearing
Specification: 40mmx36mmx20mm
Detail: SF-1 self-lubricating bushing is made of triple-layer composite material which consists of a steel backing, a sintered porous bronze particles interlayer and calendared with PTFE and Pb mixture as surface layer. It is of low f...

f038-a2 one way bearings(with inner shaft)
Specification: Weight(kg): 0.01225
Detail: One way bearings are assemblies that contain small cylindrical hardened steel pins that allow free movement of the shaft they rotate on in only one direction. One way bearings have a relatively simple construction. The design...

ssr144zz stainless steel ball bearing
Specification: 0.125x0.25x0.1094 (inch)
Detail: Deep groove ball bearings can support light-to-moderate axial loads in both directions as well as radial forces. Due to the use of stainless material, their steady load capabilities, smooth and quiet rotation, high rigidity, l...

nup1014em cylindrical roller bearing
Specification: 70x110x20 (mm)
Detail: Cylindrical roller bearings mostly consist of the cage, the rollers and guided by two capped edges on a ring. They are separable, convenient for assembly and disassembly. Especially they have the advantages in a condition that...

bk0808 needle bearing
Specification: 8x12x8 mm
Detail: Needle roller bearing with pressed outer ring is made of high-quality thin sheet by fine stamping process. It has such characteristics as small structure ***ce and large load capacity, and is suitably used for the place where ...

lm4 linear bearing
Specification: dr: 4mm D:8 mm L: 12mm
Detail: Linear bearing is rectilinear motion system. Due to the fact that the ball and axle are point-contact type as well as smaller work load and the ball rotation under the smallest bearing drag, linear bearings can support smooth,...

513121 wheel hub unit
Specification: Weight: 3.56 kg
Detail: Hub unit for automobile wheels are comprised of bearing rings, rolling elements, and cages, similar to general-purpose rolling bearings. The first-generation hub unit (Hub I), second-generation hub unit (Hub II), and third- ge...

ucp201-08 pillow block bearing
Specification: Shaft dia. H(inch.) L(inch.) J(inch.) 1/2 1-3/16 5 3-3/4 A(inch.
Detail: This is the most common type of mounted ball unit. The rib at the bottom of the housing mounting section provides for a robust unit that can withstand great loads from any direction. it is used for applications with severe loa...

608 2rs skateboard bearing 8pcs/set-red
Specification: d 8 (mm) D 22(mm) B 7 (mm)
Detail: Deep groove ball bearings can support light-to-moderate axial loads in both directions as well as radial forces. Due to their steady load capabilities, smooth and quiet rotation, high rigidity, low friction and standard accura...


Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]
1